Geehy Global website have updated the entire structure, and introduced the document center for all users. Now, you can find manuals, application notes, schematics on https://global.geehy.com/design/document
And SDKs, development boards scattered in https://global.geehy.com/design/hardware
This blog is sorting out the official Geehy documents for hardware developers. Software documents will be introduced in another blog. If you have any questions, please comment below or contact yang.chao@geehy.com
Schematics:
Types
- Mini / Tiny Board – The minimal system of the MCU
- Eval Board – Standard design of MCU peripherals
- Motor Control Board – BLDC Interface & Tuning
Circuits Included: Power / Clock Design; Essential Pull-up / Pull-down Design; JTAG / SWD Reference Design; CAN / ETH / RS-232 Driver
https://global.geehy.com/design/hardware –Filter: Development Boards
Datasheets:
(Pin Definition and Remap, Package, Size, Silkscreen, Absolute Maximum Ratings, Operation Conditions, Power Consumption)
Hardware Development Guide: AN1106/AN11101114
(Power supply scheme, clock source, reset mode
Start-up mode settings, Debug management)
AD Library:
https://global.geehy.com/design/document –Filter: Package Libraries
(IntLib: Integration of PCB and Schematics PcbLib & SchLib: PCB / Schematics Library only)
Mass Production Tools:
- JTAG / SWD Tools
APM32 Prog - https://global.geehy.com/design/hardware_detail/43
J-Link – Software Version 7.88 and Higher
SEGGER’s J-Links debug probes, as well as its family of Flasher in-circuit programmers, fully support the Geehy Polaris APM32 series MCU.
Third Party Partners - https://global.geehy.com/design/tripartite#Debugging%20Tool
- Geehy Prog ISP / SWD Programming (V1.0.2, https://global.geehy.com/design/hardware_detail/43)
COM Port: UART Programming
DFU Port: USB Programming
SWD Port: Offline Programming, V 00.29
https://global.geehy.com/uploads/tool/AN1086_APM32F4xx_ISP%20Application%20Note.pdf
